The principle of operation of the pump for penis enlargement

Many men are dissatisfied with the parameters of the penis and do not want to tolerate it. Therefore, different methods are used to help make the penis thicker and longer. A device such as a penis enlargement pump is also widely used.

The principle of operation of the device

The pump is a cylindrical device. The device is designed to increase the length and width of a man's penis, as well as increase erection.

The pump works on a simple principle. When used, it creates pressure around the male penis, which helps increase blood flow and fill the cavernous bodies with blood. The same thing happens with an erection. The penis hardens and swells very quickly, which allows you to increase its parameters.

Pump and pump types

Penis enlargement pump, regardless of type, has a unified structural principle. It is a transparent container with a centimeter on it. There are also devices that create a vacuum and maintain the required pressure.

There are three types of pumps:

  1. By hand. Vacuum is created using a piston or bulb. The cost of such devices is lower, so they are often used. But men have to wait a long time for the effects of use.
  2. Automatic. With this type of pump, the pressure in the bowl is created by an electric pump already installed in the device. You need batteries to work. Automatic devices are more preferred because of their high efficiency, which allows you to control the pressure and suction power.
  3. Living in water. The newest pump type. It differs in the use of water instead of air. This type of magnifier is safer, more effective, has fewer side effects, and lasts longer than previous models.

Pumping is carried out in two ways. The first is called packaging. Its essence is to lengthen the tunic and increase the length of the penis, but not the width. To do this, a narrow balloon is used in which the penis cannot swell to the sides, but extends upwards.

The second method is the classic pump. In this case, a wide bulb is used, in which the penis has the ability to swell in all directions. This allows you to increase the width and length of the body.

Selection criteria

The magnifying pump is selected taking into account the size of the penis and the purpose of use. Experts recommend the following.

  1. The length of the device should be about 3 cm.
  2. The width should be 2 cm larger than the diameter of the penis.
  3. It is recommended to choose a device type manually as it is the simplest for beginners.

The above penis sizes are only considered in a state of arousal.

In the process of purchasing, you should pay attention to the materials from which the magnifier is made. The bulb must be strong enough to prevent accidental damage to the male organ.


The use of a vacuum magnifier is not allowed for men suffering from the following pathologies:

  1. Thrombosis.
  2. Fibrosis.
  3. Liver diseases.
  4. Kidney disease.
  5. Diabetes.
  6. Cardiovascular pathology.
  7. Sexually transmitted diseases.
  8. Urinary incontinence.

If a man is not sure that he can use a pump to increase the length and width of his penis, it is worth consulting a doctor for an examination.

Pros and cons

The vacuum pump not only allows men to make their dignity longer and wider. The device also helps to improve erectile function, reduce the sensitivity of the body and prolong sexual intercourse. In addition, the device allows you to correct the shape of the penis, even in the presence of curvature.

Disadvantages of the pump appear only when used incorrectly. Failure to follow the instructions leads to many unpleasant consequences.

Effect of use

If you use the pump regularly, after 6 months the penis will change size forever. For maximum effect, it is recommended that men take drugs that increase the production of sex hormones at the same time. However, this can only be done after consulting a doctor.

Use a penis enlargement pump

Those who have already tried the pump say that they can get the result they want. After six months, the length of the penis increases by 3 cm and the thickness by 2 cm.

Instructions for use

No special skills are required to use a vacuum pump to enlarge the penis. Prior to the procedure, the device must be lubricated with lubricant to ensure slippage.

The movement of the penis should be lubricated with a special cream that normalizes blood flow and increases blood flow to the penis.

Then place the penis in the cylinder. Remove air from the tube to create a vacuum. With reddening of the skin, you need to wait 30 seconds and start to air. The procedure should not take more than 15-20 minutes.

Possible results

It is not in vain to create special instructions for the use of the pump. Performing all manipulations strictly allows you to avoid negative consequences. But sometimes men break the rules.

As a result, instead of the desired centimeter, you get the following:

  1. Appearance of a swollen ring at the base of the head of the penis. This is due to stagnation of lymphatic fluid. This phenomenon can occur even if the vacuum apparatus is used properly. If this side effect occurs, you should stop using the device.
  2. Swelling of the penis due to excessive lymph flow.
  3. Deterioration of erectile function.
  4. Redness of the penis, bleeding.
  5. Thrombosis. The disease poses a great threat to human life, but is extremely rare when using a pump.

It is not only important to use the pump properly to avoid negative consequences. It should not be ignored that there are contraindications to its use. If so, you should look for other ways to enlarge your penis.

Home appliances

For men who do not want to spend money to buy a factory magnifier, there is an opportunity to do it at home with their own hands.

From the cuff pump

To create an airless environment, remove the cuff pump and turn the cuff upside down. Then you need to reassemble the device, but in reverse order.

Next, you need to make a valve designed to remove excess air. For this purpose, you can use a valve from the aquarium compressor. The pump hose must be connected and sealed.

From the compressor

You can remove the compressor from unnecessary refrigeration units. After removing the evaporator and condenser, cut the pipes connecting them. Then connect the compressor to the mains.

Penil vacuum pump set

Buy an air filter from any car shop. It must be connected to the compressor port. The filter must be connected to a rubber hose of the required size. Then it remains only to test the movement of the device.

Using a syringe

Take a plastic tube, cut it into three pieces, each of which should be 10 cm in size, attach them to the tee. The result is a tee with three taps.

Connect the tip of the syringe to the central outlet. Install the valves on the prepared side outlets.

In this case, it is important to open one up and the other inside. You need to draw arrows indicating the direction of the air so as not to interfere in the future.

Use of plastic bottles

A very simple penis enlargement pump can be created from ordinary plastic bottles. It is important to choose only containers of different sizes. For a larger one, you need to cut off the top to get a cylindrical shape.

Drill holes in the bottom of the second bottle and insert into the first bowl. It is important that there is no large gap between the walls. Then you need to connect a hose to a large container. You can get it from a bicycle wheel pump.

Device care

Proper care is important to maximize the life of the magnifier. If the appliance is new and has not been used, it should be thoroughly washed with soap, then dried and treated with any antiseptic. The appliance must be washed further after each use.

Do not treat the pump with hydrogen peroxide or hot water or use greasy oils during the procedure. Otherwise, the risk of injury is high.